Liams blog!

there are three types of different networks: LAN, WAN, WLAN

LAN:Stands for Local Area Network. A LAN describes connected devices under the same network, LAN’s are usually found in small offices, Schools and sometimes can be found at home.

Lan devices: Computers,printers, wireless, cables (media) switches, hub, router and severs.

WAN: stands for Wireless Area Network.  Are networks that connect LAN networks in different places and countries, for example, the internet is a massive WAN, the internet is made up of lots of connected LAN’s.

WLAN: Stands for Wireless local area network. Wireless devices connect to access points in specific areas. the range of a typical WLAN is around 30M indoors.

Peer to peer network: is a network where there is no administrator, it is all user contributed, and it cannot be shut down, like certain programmes such as youtube and limewire.

Bandwidth: Bandwidth is the amount of data that can be sent over a period of time. Bandwidth is usually measured in bits per second (bps).Imagine a motorway with cars on it, obviously the wider the motorway, the more cars can travel on it at one time, so therefore cars can get to their destinations quicker. So think of that, but in computer terms, the more bandwidth, the more information can be transferred within that period of time.

IP addressing: an IP address is used to identify your computer/device on a network. your computer gets an IP address when it first joins this network. Each device must have a unique address.

DHCP:Automatically gives a device an IP address automatically when it joins the network for the first time.

ICMP: (Internet Control Message Protocol) , is used by devices on a network to send error and control messages to computers and servers.

Hubs: is a device that extends the range on a network, it does this by recieving data on one port and then sending it to all other ports.

Bridges and Switches: this is were files are broken up into packets, then they are transmitted over a network, this allows for error checking and asier retransmission if the packet is lost or corrupted.

Routers: are devices the connect entire netowrks to eachother. Routers use use IP addressess to send frames (packets and address information)to eachother

WAP: (Wireless Access Points) Provide network access to wireless devices (laptops Iphones e.c.t)

Multipurpose devices: Are network devices that perform more than one function, it is cheaper and doenst take up as much room as buying seperate devices.

Twisted pair (Media): is a type of copper cabling that is used for telephones.and most Ethernet networks. the twisted pair is designed to provide protection agaisnt crosstalk. (noise generated  by adjacent pairs of wires in the cable.

unsheilded Twisted Pairs: Cable that has two of four pairs of wires, this relies totally on cancellation effect, produced by the twisted wire pairs that limits signal caused by EMI (electromagnetic interface.)

Sheilded Twister pair: Each pair of wires is wrapped in a metalic foil, to better sheild the wires from noise.

Fiber Optic: a glass or plastic conductor that transmits information using light. Because it is made of either plastic or glass it is not affected by EMI. this means that fibre optic can deliver a clearer signals that are clearer, can go further and have greater bandwidth.

There are 5 LAN topoligies:

• bus
• ring
• star
• extended star
• mesh

Ethernet Standards: 802.11a, data rates of upto 54Mbps

802.11b, data rsates of upto 11Mbps

802.11g: maximum speeds of 54Mbps

802.11n, theoretical bandwidth of 540 Mbps

OSI Model: is a standard

 Extended Star

• Please- Physical
• do- Data
• not-Network
• throw – transport
• soggy – Session
• pizza – Presentation
• Away – Application

• Bandwidth is the amount of data that can be sent over a period of time. Bandwidth is usually measured in bits per second (bps).
• when data is sent, it is split up into “packets” and in each of these packets is a header. The header contains information from where the data was sent, where the data is going to and how all the packets are going to be put back together again when the data reaches its destination. 
• Imagine a motorway with cars on it, obviously the wider the motorway, the more cars can travel on it at one time, so therefore cars can get to their destinations quicker. So think of that, but in computer terms, the more bandwidth, the more information can be transferred within that period of time.
• Another real life example of bandwith is a pipe, the wider the pipe gets the more water can get through the pipe, the water wont go through quicker, its just lets more water through the pipe, within the same amount of time.

the new 4G dongle that will be available in mid 2010

4G networks, released in April this year has been thought to be able to reach speeds of up to 100mb p/s, 10 times quicker than the fastest 3G speed available today. Despite the launch of the network, at the moment there are no handsets on the market that supports 4G. Stockholm in Sweden and Oslo in Norway will be the first places on Earth to test the network out, the telephone company Telia Sonera have asked customers to test out the network in the early part of this year. 4G uses Long Term Evolution Technology (LTE).

Pro’s : access to faster broadband wherever you are.

Cons: people have to spend more money to buy it!

the difference of components inside and ouside a laptop. so what different? well all components inside a laptop are smaller, they have to be, to make a laptop as portable and as compact as possible for example, below there are two pictures, the one on the left being a laptop motherboard, and the one on the right, a PC motherboard.

this is smaller than a normal desktop motherboard.

Most laptop components are designed differently to internal desktop components.

this is larger than a laptop motherboard becasue there is more room in its base unit.

Laptop processors are designed to use less power and create less heat, therefore if laptop processors create less heat, they will not need the huge cooling devices (fans) to  keep the internal components cool, however if they were needed, it would make the laptop less portable and would also make the laptop heavier.

its my first post people!!

: ]